Premium Quality Soaps & Lubricants
Ease-On Water Dispersible Pipe Joint Lubricant
  • Can be applied from -10° to 150°F
  • Soft, creamy compound
  • Meets NSF Standard 61-G
  • Will not support bacteria
  • Contains no petroleum
  • Slow rate of solubility
  • Non-toxic
  • Biodegradable
  • Will not separate
  • FBC™ System compatible


FBC™ System Compatible indicates that this product has been tested, and is monitored on an ongoing basis, to assure its chemical compatibility with FlowGuard Gold®, BlazeMaster® and Corzan® piping systems and products made with TempRite® Technology. The FBC System Compatible Logo, FBC™, FlowGuard Gold®, BlazeMaster®, Corzan®, and TempRite® are trademarks of Lubrizol Advanced Materials, Inc. or its affiliates.

Ease-On Pipe Joint Lubricant effectively lubricates pipe joints and gaskets for safe and efficient assembly of all types of pipelines, especially potable water systems. Ease-On will efficiently dissipate and not leave a residue when flushed in accordance with recommended AWWA procedures.

Ease-On Pipe Joint Lubricant is certified to meet NSF/ANSI Standard 61 for potable water pipelines. Both JTM and NSF use strict analytical standards and formulation consistency to assure production of a safe lubricant for water pipe joining requirements. In addition, Ease-On is FBC™ System Compatible.

Ease-On is a non-hazardous lubricant formulated from a biodegradable blend of lubricity enhancers and soaps. Mating of abutting pipes forces the paste into cavities, thus providing the needed lubrication to complete the coupling and seal the joint. The soap-based lubricant does not dry out when gaskets are stored in sealed plastic containers or bags.

Ease-On is formulated to work well in very cold or very hot temperatures. Since Ease-On is petroleum and phosphate free, it will not swell gaskets. Ease-On is a blend of environmentally friendly raw materials common in the lubricant and soap industries. It will not irritate the skin, and is non-toxic. Ease-On can be cleaned using warm water and soap.

Technical Data

Form: Creamy Paste
Color: Off-white
Odor: Bland
pH (5% in water) = Approximately 9.0
Bulk Density: Approximately 9.3 lbs./gallon
Maximum Penetration: 360 @ 77°F

Description Units Per Case Cases Per Pallet
2 Pound Quart
8 Pound Gallon
25 Pound Pail
40 Pound Pail
450 Pound Drum

  31025 Carter Street, Solon, Ohio 44139
Phone: 800-229-6744 / 440-287-2302
Fax: 440-287-3095

Copyright ©2024 JTM Products, Inc.
Follow Us
ERISA Documents for
Welfare Benefit Plan
High performance water dispersible pipe joint lubricant, premium cutting fluid, and ultra low-foam cutting fluid announced!

31025 Carter Street, Solon, Ohio 44139
Phone: 800-229-6744 / 440-287-2302
Fax: 440-287-3095

Copyright ©2020 JTM Products, Inc. All Rights Reserved.
Follow Us